Panasonic CT-35S31S Operating Instructions Manual

Panasonic CT-35S31S Operating Instructions Manual Manual pdf 40 page image

Set Up FeaturesAIR/CABLE• AIR• CATV 1• CATV2AUTO PROGRAMMANUAL PROGRAMCLOCK SET4. Press CH UP or DOWN button to select the following:AIR/CABLE, AUTO PROGRAM, MANUAL PROGRAM, orCLOCK SET.AIR/CABLESelect this function to change between regular VHF/UHFbroadcasting (AIR) and CABLE TV (CATV1 or CATV2),5. If AIR/CABLE is selected, press the ACTION button to set anddisplay AIR/CABLE Menu.ACTIONDisplays and Exits MenusLocated On Remote Control_ Highlight DesiredII'<..Yoq ...,,'1voL... -II.,>'- FeatureWhenSelects _._orAdjusts .,_,. Menu is DisplayedFeatures WhenMenu is Displayed1. Press the ACTION button to display the MAIN MENU.2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttons tohighlight the SET UP Icon.3. Press the ACTION button to display the SET UP Menu.-SET UP-AIR/CABLEAUTO PROGRAMMANUAL PROGRAMCLOCK SETPRESS ACTION TO SET-AIR/CABLE-AIRCATV1CATV2PRESS ACTION TO EXIT6. Press CH UP or DOWN button to select AIR, CATV1 or CATV2.7. Press the ACTION button twice to EXIT.Reception channels for each mode are shown below.Refer to your cable or TV guide for channel identification standards.If certain CATV channels are poor or not possible in the CATVmode, set the AIR/CABLE select to CATV2.AIRVHF 2~13chUHF 14~69chRECEPTION BANDCATV1 or CATV2CATV CHANNELVHF 2-13Mid band J~WA-5 - A-1Super band J~WHyper bandW+l ~ W+28Ultra bandW+29 ~ W+84Indicated on thescreen2-1314-2295 - 9923 -3637 ~ 6465 ~ 125-40 -