Panasonic CT-35S31S Operating Instructions Manual

Panasonic CT-35S31S Operating Instructions Manual Manual pdf 41 page image

AUTO PROGRAMThe AUTO PROGRAM feature allows you to place all channels witha video signal intoCharmer Memory. When youpress the CHAN NELUP or DOWN button only those channels with a video signal will beaccessed.NOTE: AIR/CABLE Tuning mode must be set properlyfor your system.CHANNEL 06NOW AUTOPROGRAMIS IN PROGRESS1. Press the ACTION button to display the MAIN MENU.2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttons tohighlight the SET UP Icon.3. Press the ACTION button to display the SET UP Menu.-SET UP-AIR/CABLEAUTO PROGRAMMANUAL PROGRAMCLOCK SETPRESS ACTION TO SET4. Press the CH UP or DOWN button to highlight"AUTO PROGRAM".5. Press the ACTION button to set and display the AUTO PROGRAM.6. Press the VOL LEFT or RIGHT button to start AUTO PROGRAMScan. Channels will automatically advance until all channelshave been scanned.If the ACTION button is pressed while the AUTOPROGRAMfunction is engaged, programming will stop. If two antennas areconnected, switch antenna inputs with the INPUT SELECT Menuand repeat AUTO PROGRAM for the second antenna input. SeeMANUAL PROGRAM to add or erase additional channels.7. Press the ACTION button twice to Exit.NOTE: Some channels with very weak signals may belocked into memory. These must be deletedmanually using the MANUAL PROGRAM feature.MANUAL PROGRAMUse this function after AUTOPROGRAM to add or erase additionalchannels. This feature allows you to select which channels areplaced into CHANNEL MEMORY so when you press the CHANNELUP or DOWN button only those channels you desire will beaccessed.1. Press the ACTION button to display the MAIN MENU.2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttons tohighlight the SET UP Icon.3. Press the ACTION button to display the SET UP Menu.INOTE: Channel numbers with video signal present will be Istored in CHANNEL MEMORY. I-SET UP-AIR/CABLEAUTO PROGRAMMANUAL PROGRAMCLOCK SETPRESS ACTION TO SET-SET UP-AIR/CABLEAUTO PROGRAMMANUAL PROGRAMCLOCK SETPRESS ACTION TO SETIf ACTION button is pressed AUTO PROGRAM will automaticallystore active TV Channels in CHANNEL MEMORY. This will allowyou to skip over unused channels when using the CHANNEL UP orDOWN buttons.-41-