Panasonic CT-35S31S Operating Instructions Manual

Panasonic CT-35S31S Operating Instructions Manual Manual pdf 42 page image

4. Press the CH UP or DOWN button to highlight "MANUALPROGRAM".5. Press the ACTION button to display MANUAL PROG RAM Menu.6. Select hours position by pressing CH UP button if necessary.Press the VOL LEFT or RIGHT button to Set Hours (set AM/PMaccordingly). VOL LEFT or RIGHT display numbers down andup.-MANUAL PROGRAM-CHANNEL 13ADD ERASEPRESS ACTION TO EXITAdd or erase additional channels while still in CHANNEL MEMORYusing the number buttons and then add or erase using theVOL LEFT or RIGHT buttons.6. Use Remote Keyboard numbers (0 through 9) or CH UP/DOWNbuttons to select channels.7. Press the VOL RIGHT button to add channel(s) to memory.Press the VOL LEFT button to delete channel(s) from memory.8. Repeat Steps 6 and 7 to continue adding or deleting channels.9. Press the ACTION button twice to EXIT.NOTE: Some channels with very weak signals may belocked into memory. These must be deleted manuallyusing the MANUAL PROGRAM feature.CLOCK SETCLOCK (when set) will display On Screen at initial TURN ON, aftera channel change and when pressing RECALL button. It must beset in order to operate the TIMER feature.1. Press the ACTION button to display the MAIN MENU.2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttons tohighlight the SET UP Icon.3. Press the ACTION button to display the SET UP Menu.4. Press CH UP or DOWN button to highlight CLOCK SET.5. Press the ACTION button to set and display CLOCK SET Menu.-SET UP-AIR/CABLEAUTO PROGRAMMANUAL PROGRAMCLOCK SETPRESS ACTION TO SET -42--CLOCK SET---:-- A.M.PRESS ACTION TO EXIT7. Press the CH DOWN button to highlight minutes position.(CHANGE LOCATION) Press the VOL LEFT or RIGHT buttonto set minutes.8. Press the ACTION button twice to EXIT once the proper time isset (Including AM or PM).-CLOCK SET-12:15 P.M.PRESS ACTION TO EXITNOTE: Pressing the ACTION button again will return youback to the SET UP Icon.