82 Using Play List: Editing Play Lists◆ NOTE:• Pressing the following buttons will also finalize a change.- Pressing the cursor buttons.- Pressing the SET button.• Performing any of the following operations will discard thechanges and make you return to the play list screen.- Pressing the EXIT button.- Holding down the SHIFT button and pressing the EXIT button.- Pressing the PLAY LIST button.• You cannot make changes that go beyond the start and endpoints of a clip.• You cannot make changes that reverse the IN and OUT pointlocations.• An event with an EXTRA track cannot be modified. Delete theEXTRA track before modifying the event.• The IN, OUT and SPLIT buttons allow you to use the TRIM+/–button for trimming in the event register screen when the timecode is displayed.You can move and change the order of play list events.1 Open the play list screen.2 Select the event you want to move and press theSET button.The event is selected and appears in blue. This procedurecan be repeated as necessary to select multiple events.◆ NOTE:• To quickly select successive linesHold down the SHIFT button and press the SET button (MULTISEL) to select all events from the previous time the SET buttonwas pressed and up to the cursor location where the MULTI SELbutton was pressed.• To cancel a selectionPlace the cursor on a selected event and press the SET buttonto cancel the selection.• To cancel all selectionsHold down the SHIFT button and press the EXIT button(CANCEL) to cancel all selected lines.3 Use the cursor buttons to select a destination.4 Hold down the SHIFT button and press the GO TObutton.The selected event moves to the location right before thecursor and the events at the cursor location movedownwards.◆ NOTE:• It is not possible to move only the event if that event contains anEXTRA track. Move the event and the EXTRA track.Changing Event Order2,3 41
