50 Clip Management: Attaching Text Memos and Shot MarksAttaching Text Memos and Shot MarksA text memo can be attached in a clip to mark a specificlocation. The user can attach shot marks to distinguish clipsfrom each other. This function is not available on cards wherethe write protect switch has been set to PROTECT.Use the NEXT and PREV buttons to locate attached textmemos during video playback.1 Press the TEXT MEMO button during recording,playback or when thumbnails are displayed.• Press this button during recording and playback whereyou want to attach a text memo.• Pressing this button in the thumbnail screen adds a textmemo at the thumbnail clip location (normally at thebeginning).◆ NOTE:• Up to 100 text memos can be attached in one clip.• Pressing the TEXT MEMO button during playback maytemporarily halt playback. This is normal and not a malfunction.• Text memos are not recorded during LOOP REC or VFR ONrecording.1 Press the THUMBNAIL button.The Thumbnail Screen appears on the LCD monitor.2 Press the thumbnail menu button and choose[THUMBNAIL] – [TEXT MEMO CLIPS] from thethumbnail menu.The thumbnails of clips with text memos appear at the topof the LCD monitor. Information on the selected clip textmemo appears in the lower half of the LCD monitor.◆ NOTE:• In the following instances, the thumbnail in the row below at the textmemo location may be grayed out when a text memo clip appears.• An AVC-Intra clip when an optional AVC-Intra Codec board hasnot been installed.• An AVC-Intra clip with a different SYSTEM FREQ. setting.3 Place the cursor on the clip (with a text memo) youwant play back and press the SET button.The cursor moves to the lower half of the LCD monitor.Attaching Text MemosPlaying Back From Text Memo Location1ThumbnaildisplayIndicates the totalnumber of text memosattached to clipsIndicates still imagesincluded with the textmemosThe cursor moves
