Panasonic 1M Operation Manuals

Contents

Panasonic 1M Operation Manuals Manual pdf 63 page image

While Security is turned on ( pages 100to 101), the Preliminary Alarm Time cannotbe changed. To change the Door PhoneSound, please first disarm Security.Select one of "Voice/ImitationSound/Off" and touchTouch for the security system you wish to changeon the Security Preliminary Alarm Screen, select one of"Off/60sec./120sec./300sec.", and touchNoteNoteNote63Continued on next page3 Security Preliminary Alarm ScreenExternal Security Door Phone SoundSecurity preliminary alarmLinked with Secured AbsenceTouchany oneTouch2Touchany one1Door Phone Sound ScreenTouch2Touchany one13The "External Security Door Phone Sound" setting cannot bechanged while Security is turned On ( pages 100 to 101). Tochange the Door Phone Sound, please first disarm Security.NoteSelect one of "On/Off" and touch3Setting according to your preferencesThis can be set if the "Permit changes to delay setting" is set to "Yes" in Installation Setting.(Please contact the store responsible for installation or the service and maintenance company)If the "Permit changes to delay setting" has been set to "No", the "Security Preliminary Alarm" indicator does not appear.To turn off Security using the External Security Switch, Installation Setting is required.(Consult with the company that installed the system or the administrating company.)INTRODUCTION USUAL USAGE SETTING ACCORDING TOYOUR PREFERENCESOPERATIONS AND MEASURESWHEN AN ALARM GOES OFF OTHERRECORDMANAGEMENTSECURITY ALARM SETTINGAND DISARMING60sec.Off120sec.300sec.If you open the door with Security turned on,the Security Alarm sounds immediately.If you open the door with Security turned on, the Preliminary Alarmsounds for about 60 seconds before the Security Alarm sounds.If you open the door with Security turned on, the Preliminary Alarmsounds for about 120 seconds before the Security Alarm sounds.If you open the door with Security turned on, the Preliminary Alarmsounds for about 300 seconds before the Security Alarm sounds.Security 1, Security 3, Security 4: OffSecurity 2: 60 secondsFactory default settingOn Automatically switches Living Mode to AbsenceMode when the external security setting is made.Living Mode is not changed when theexternal security setting is made.OfffactorydefaultsettingNo message or notification sound is emittedfrom the Unit Entrance.A message is played from the Unit Entrance.When Security is turned On: Security has been turned on.When Door Closure Security is On: BeepCheck that all windows and doors are locked.When Security is turned Off: Security has been turned off.ImitationSoundVoiceA notification sound is emitted from the Master/Unit Entrance.When Security is turned On: beepWhen Door Closure Security is On: Beep Beep BeepWhen Security is disarmed: BeepsOfffactorydefaultsettingLinked with Secured Absence ScreenTouch2Touchany one1