Panasonic 1M Operation Manuals

Contents

Panasonic 1M Operation Manuals Manual pdf 46 page image

*1Ringtone VolumeTouch SoundSetting Description Default PageThis sets whether to emit a ring for a general announcement.Earthquake Setting * 1RingtoneExcuse ToneAway-from-homeMessage This sets the answer message for when you are not at home.HighOnOnMediumAccept CallsTelephone 130 sec.Fixed message 1Fixed message 2YesNoImitation SoundSetting according to your preferences46You can set the ringtone volume etc. according to your preferences.52 535455 57This sets the ringtone and number of rings when a call is made.58 6061 64Yuttari On/Off This sets whether always to use Yuttari when calling. Off 60RingtoneGeneralAnnouncementVolume Setting This sets the volume when a call is made from the MainEntrance, the Unit Entrance or the manager room.This sets whether to emit touch sounds when the touch panelis operated or a button is pressed.This sets the volume of the earthquake alarm for Intensity 4,Intensity 3 and Erroneous reports.Lobby Phone: Melody 1Number of rings: Ring continuouslyEntrance(Unit Entrance) : Melody 2Number of rings: Ring onceManager Room: Melody 4Number of rings: Ring continuouslyThis sets the ringtone and number of rings that sound when acall is made from the Lobby Phone (Main Entrance), theentrance (Unit Entrance), or the Manager Room.Sound SettingReceivedCall TimeRejectCallsThis sets whether or not to receive messages from the housinginformation board of Other Units.This sets the Received Call Time when a call is made from the MainEntrance, the Unit Entrance, another Unit or the Manager Room.Melody 5Number of rings: Ring onceThis sets the excuse sound emitted from the Master when theexcuse function is used. (Excuse function page 31)Pretend To BeOut MessageNot-home SettingPretend To BeOut IndicatorThis sets the answer message that plays from the Master when you areusing the Pretend to be out function. (Pretend to be out function page 32)This sets whether to activate a function which,when a call ismade by a visitor, displays on the screen and, inresponse to an operation, plays the Not-home message.(Pretend to be out function page 32)Security NumberSetting This sets the private security number for disarming the securityalarm and security alert.Security OffSoundSecurity Setting Security AlarmDelaySecurityPreliminaryAlarmThis sets whether the Master emits a sound when the alarm isset or disarmed on the security system.This sets the time between the security alarm being set and thesystem entering the alarmed state. (A time can be set for eachsecurity system.)This can be set if the "Permit changes to delay setting" is setto "Yes" in Installation Setting.For further information please contact the store responsiblefor installation or the service and maintenance company.If the "Permit changes to delay setting" has been set to "No",the "Security Alarm Delay" indicator does not appear.This sets the time between the Security system being trippedand the Security Alert (Security Preliminary Alarm) sounding.(A time can be set for each security system.)This can be set if the "Permit changes to delay setting" is setto "Yes" in Installation Setting.For further information please contact the store responsiblefor installation or the service and maintenance company.If the "Permit changes to delay setting" has been set to "No",the "Security Preliminary Alarm" indicator does not appear.Security 1/Security 3/Security 4: NoSecurity 2:60 secondsSecurity 1/Security 3/Security 4: NoSecurity 2:60 secondsNoteNoteNoteAcceptingcalls fromotherapartments/Ringtone