UNLOCKTALKFIRE CONFIRMMENUOFFPOWERUnlockTalkUNLOCKTALKMENUOFFOFFMenuPowerPOWERUnlockTalkUNLOCKTALKMENUOFFOFFMenuPowerPOWERNotchmicroSD memory card microSDmemory cardOpen it by hooking a fingerinto the holeGrooveINTRODUCTION USUAL USAGE SETTING ACCORDING TOYOUR PREFERENCES OPERATIONS AND MEASURESWHEN AN ALARM GOES OFF OTHERRECORDMANAGEMENTSECURITY ALARM SETTINGAND DISARMING15Inserting and Ejecting a microSD Memory CardUsing a Handset (Receiver) Sold SeparatelyUsing an Extension SpeakerNoteRemove the setting cover1 2 Ejecting the microSDThe call sound sounds, and the monitor screen shows images.1Pick up the receiver and talk on the receiver.2When finished talking, put the receiver back.* The screen turns blue when the caller device does not have a camera.3[Calling with the Handset (Receiver)][In the case of the luminous extension speaker, the flashlamp will light together with the call sound.]A handset (receiver) sold separately can be installed.The warning sound or call sound sounds at the same time as the base unit.Handset (Receiver)NoteUNLOCKTALKFIRE CONFIRMMENUOFFPOWER21Press withfingers3Hooks 2Grooves 21Install the setting cover23 Press with fingers3Setting coverinsertion holeSettingcover1Insert a microSD memory card during standby status (when nothing is displayed on the screen).Follow the eject operation described on page 69 when ejecting the microSD memory card.Confirm the orientation ofthe microSD memorycard, and insert it straightin until you hear a clickInsert the settingcover in the settingcover insertion holeLightly set the hooksinto the groovesLightly set thehooks into thegroovesmemory cardPush the microSD memory card untilyou hear a click, then pull the poppedout card straight out.You can talk on the receiver if you pick up the receiver while talking onthe base unit. When finished talking, put the receiver back.You cannot switch to the base unit (hands free) while talking on thehandset (receiver).Consult with the company that installed the system or theadministrating company. Recess Model:SHV8110K
