For information about the procedure for unitresidents, refer to "Receiving a Call" ( page 21).1142. Talk FunctionCalling a Dwelling UnitCalling the Manager Room2580369147The maximum length of a call is 3 minutes.Enter the unit number... 1 0 112 Press the Call button2 Press the Call button1 Press the buttonNoteExample 1 ) When calling Unit 101.Enter the unit number using the numeric keypadExample 2 ) When there are building numbers (callingUnit 101 of Building 2)Enter the building number...Enter the unit number..........* If pushed the wrong number, press the button(Clear button) and start over the procedure from thebeginning.Ringtone is played.If the unit resident does not answer for approximately30 seconds or 60 seconds, the call is terminated.If the called unit is engaged in another call or allcalling channels in the system are busy, the message"The line is busy. Please try again later." is displayed.If an Alarm Sound is being emitted because of a fireor gas leak in the unit about to be visited, no callcan be made to the unit.Ringtone is played.If the manager room does not answer for 30 seconds,the call is terminated.The maximum length of a call is 3 minutes.Note If the called base unit in the manager room is busy,the message "The line is busy. Please try again later."is displayed.258036914721 Numeric keypadCall buttonbutton(Clear button)Lobby phone with a built-in cameraCall buttonLobby phone with a built-in camerabutton1221 0 1
