3-28 Using the BIOS Setup Utility7. Remove the diskette and press any key to continue. The utility updates the BIOS.Power off your computer. The next time you power on your computer, you willhave the latest NEC Versa SXi computer BIOS revision level.8. Power on your computer. A CMOS Checksum error message appears and promptsyou to press F1 to enter Setup.9. Press F1 to enter Setup and restore the default parameter settings.10. Be sure to modify any custom settings that you may have configured.Identifying the Switch SettingsA four-position dip switch is located on the main board inside the system. Thefollowing list identifies each switch setting and its function.! Switch 1 — Keyboard select; Default is “ON” for U.S. 85 key keyboard! Switch 2 — Keyboard select; Default is “OFF” for U.S. 85 key keyboard! Switch 3 — Logo select; Default is “OFF” for U.S.! Switch 4, Password Override Switch — The default setting is “OFF.” If you forgetyour password and cannot access the data on your NEC Versa, change the setting to“ON” and your current password is erased.
