Using the BIOS Setup Utility 3-5Resetting System ParametersTo reset all parameters to the default settings, highlight and press Enter to select AutoConfiguration with Defaults from the BIOS Setup Main Menu. Use the arrow keys toselect Yes and press Enter.Standard CMOS SetupUse the Standard CMOS Setup screen to view the System Time, System Date and tomodify drive parameters and related settings.Standard CMOS SetupParameter Default Setting Alternate Setting(s)Date mm/dd/yyyySystem Memory (automatically detected)Time hh/mm/ssDiskette Drive A 1.44 MB, 3 1/2 Not installedInternal Auto CD/DVD, SuperDsk, NotInstalled, User DefinedVersaBay Auto CD/DVD, SuperDsk, NotInstalled, User DefinedBoot Sector VirusProtectionDisabled Enabled! Date — Sets your NEC Versa’s calendar month, day and year. These settingsremain in memory even after you turn off system power.To set the date use the Tab or arrow keys to move from field to field. Use the PgUpor PgDn key to change the numbers within each field.! System Memory — Displays the amount of system memory currently installed inyour system.! Time — Sets the time, enter the current hour, minute, and second in hr/min/sec,24-hour format.To set the time use the Tab or arrow keys to move from field to field. Use the PgUpor PgDn key to change the numbers within each field.! Diskette Drive — Designates the drive type for your diskette drive.! Internal Devices — Assigns devices to the internal drive and VersaBay device inyour system.
