9.3 Using Scan to E-mail Operations 99-57Internet Fax & Network Scan(Only with NEFAX691) Chapter 99.3.1 Transmission Procedures9.3.1.1 Starting to Scan1 Press the [Scan] key.The copier switches to Scan mode,and the Scan screen appears.2 Place the document to bescanned in the auto documentfeeder. Adjust the guides to thesize of the document. Load the document withthe surface to be scannedface up.3 Press the [123/ABC] key.4 Press the keys on the 10-key pad toenter the e-mail address, and thenpress the [Yes] key. The e-mailaddress can also be specified usingone of the following methods. “Specifying the Destination Using One-Touch Dial Keys” onpage 9-63. “Specifying the Destination Using Speed Dial Numbers” onpage 9-64. “Specifying the Destination Using the Phone Book” on page 9-66. To skip specifying the subject line, resolution, etc., press the [Start]key, instead of the [Yes] key.
