8 8.6 When the Message “PAPER SIZE ERROR” Appears8-18When a Message Appears Chapter 88.6 When the Message “PAPER SIZE ERROR” AppearsIf the paper size specified for a paper tray differs from the size of the paper loadedin the tray, the message shown below appears when paper is fed from that tray.Check the message for the paper tray and the paper size to be fed, and then loadpaper according to the corresponding procedure described below.For Tray11 Select “TRAY1 PAPER”. “Selecting the “PAPER SOURCE SETUP” menu” on page 7-122 Press the [1] key of the 10-KeyPad, and then specify the correctpaper type and size. “Specifying the Setting for“TRAY1 PAPER”” onpage 7-13HLHL LG
