9 9.3 Using Scan to E-mail Operations9-58Internet Fax & Network Scan(Only with NEFAX691) Chapter 9 If settings such as the subject, cc recipient, and resolution are notto be specified, press the [Start] key instead of the [Yes] key, andskip to step 10.5 Enter a title (subject), and thenpress the [Yes] key.6 Enter the e-mail address for anyadditional recipient, and then pressthe [Yes] key. To specify more then one CC address, press the [Yes] key to enterthe additional addresses. Repeat step 6 until all of the recipientshave been specified.7 After you have finished specifyingthe addresses for additionalrecipients, press the [Yes] key.8 Press the and keys to selectthe color mode (“COLOR” or “B/W”),and then press the [Yes] key.9 Press the and keys to selectthe resolution (150× 150 dpi,300× 300 dpi, or 600× 600 dpi), andthen press the [Yes] key. The 600× 600 dpi resolution cannot be selected if “COLOR” wasselected as the scan mode in step 8. To specify detailed settings for the scan mode, press the key. For information on specifying detailed settings, refer to “Changingthe Scan Mode Settings” on page 9-59.10 Press the [Start] key.Scanning starts, and then the scandata is sent to the recipients. To change the size of the scanned image, press the key. For information on changing the size, refer to “Changing theScanned Image Size” on page 9-60.
