3.3 Parts Names and Their Functions 33-5Before Making Copies or Faxing Chapter 3Inside the Machine2 Document FeederCover (Doc. FeedCover)Open when clearing an original that has been misfed.3 Document Guide Plate Slide the guide plate to the size of the originals.4 Document Exit Tray Receives originals which have been scanned by the machine.5 Front Cover Open when replacing the Toner Cartridge or Drum Cartridge, orclearing a paper misfeed.6 Bypass Tray Use for manual feeding of paper.Holds up to 10 sheets of plain paper.7 Tray1 door If Legal-size paper is installed, open this door.8 Copy Tray Holds copies fed out face down from the machine.The Copy Tray can be adjusted to one of three angles. Adjust the CopyTray to the angle appropriate for its application.9 Tray1 Holds up to 250 sheets of paper and easily adjusts to different papersizes.Special paper can be used.10 Control Panel Use to start a print cycle and make necessary settings.11 Power Switch Use to turn the machine on and off.12 External telephone jack(TEL PORT)Used for connecting a line to a telephone.13 Telephone line jack forline 1 (LINE PORT 1)Used for connecting to a standard telephone line.14 USB Port For details, refer to the User Manual for the printer controller.No. Part Name Description1No. Part Name Description1 Imaging Cartridge Generates the print image.The Imaging Cartridge is constructed of both the Drum Cartridge andthe Toner Cartridge set into place.
