English–6Bosch eBike Systems 0 276 001 Y45 | (12.10.12)Notes on Riding with the eBike SystemWhen does the eBike Drive Operate?The eBike drive supports you when riding, as long as you stepinto the pedals. Without pedaling, there is no assistance. Themotor output always depends on the amount of your pedalingpower.When applying less pedaling power, the assistance or supportwill be lower than when applying a lot of pedaling power. Thisapplies independent of the assistance Level.The eBike drive automatically switches off at speeds in excessof 45 km/h. When the speed falls below 45 km/h, the drive isautomatically available again.An exception applies for the start-assistance function, inwhich the eBike can be driven at low speed without pedaling.The eBike can also be ridden as a normal bicycle without as-sistance at any time, by either switching off the eBike systemor setting the assistance level to “OFF”. The same applieswhen the battery pack is empty.Interaction of the eBike System with the Bicycle GearsThe bicycle gears should be used as with a normal bicycle,even with eBike drive (please observe the operating instruc-tions of your eBike).Independent of the type of gearing, it is recommended tobriefly interrupt the pedaling while changing gears. Thismakes changing gears easier and reduces the wear of thedrive train.By selecting the right gear, you can increase the speed andrange with the same pedaling effort.Gathering First ExperienceIt is recommended to gather first experience with the eBikeaway from roads with heavy traffic.Try out the different assistance levels. As soon as you feelsafe, you can participate in traffic with the eBike as with anyother bicycle.Test the operating range of your eBike under different condi-tions before planning longer and more challenging rides.Influences on the Operating RangeThe operating range depends on many factors, such as:– Assistance level,– Gear-switching behaviour,– Bicycle tyres and tyre pressure,– Age and condition of the battery pack,– Route profile (inclines) and road or path conditions (roador path surface),– Head wind and ambient temperature,– Weight of the eBike, rider and equipment/luggageFor these reasons, it is not possible to predict an accurate op-erating range before starting your ride. General rules:– For the same motor output of the eBike drive: The lesspower or force that you have to bring about to reach a cer-tain speed (e.g. through optimal use of the gears), the lessenergy the eBike drive will consume, and the greater therange for a battery-pack charge.– The higher the assistance level under otherwise same con-ditions, the lower the range.Careful Handling of the eBikePlease observe the operating and storage temperatures of theeBike components. Protect the drive unit, drive HMI and bat-tery pack against extreme temperatures (e.g. from intensesunlight without adequate ventilation). The components (es-pecially the battery pack) can become damaged through ex-treme temperatures.Maintenance and ServiceMaintenance and CleaningKeep all components of your eBike clean, especially the bat-tery-pack contacts and corresponding holder contacts. Cleanthem carefully with a soft, damp cloth.All components including the drive unit may not be immersedin water or cleaned with a high-pressure cleaner.For service or repairs on the eBike, please refer to an author-ised bicycle dealer.After-sales Service and Customer AssistanceIn case of questions concerning the eBike system and its com-ponents, please refer to an authorised bicycle dealer.For contact data of authorised bicycle dealers, please refer towww.bosch-ebike.comTransportThe battery packs are subject to the Dangerous Goods Legis-lation requirements. Private users can transport batterypacks by road without further requirements.When being transported by commercial users or third parties(e.g. via air transport or forwarding agency), special require-ments on packaging and labelling must be observed (e.g. ADRRegulations). For preparation of the item being shipped, anexpert for hazardous material can be consulted as required.Dispatch battery packs only when the housing is undamaged.Tape or mask off open contacts and pack up the battery packin such a manner that it cannot move around in the packaging.Please also observe possibly more detailed national regula-tions.In case of questions concerning transport of the batterypacks, please refer to an authorised bicycle dealer. Bicycledealers can also provide suitable transport packaging.