Husqvarna DXR 95 Operator's Manual

Also see for DXR 145: Operator's manual

When the joysticks are locked, the product goes into idlemode. The hydraulic oil goes into the hydraulic oil tankand there is no pressure in the cylinders.1. Make sure that the joysticks are in the neutralposition.2. On the right joystick, push the left top button (B). Thejoysticks on the remote control are unlocked and thesymbol (A) is removed.BTo do a pairing operation between theremote control and the product (DXR95)The pairing operation between the product and theremote control is done by the factory. A new pairingoperation is necessary if the remote control is replacedor if you change remote controls between products.1. Start the remote control. Refer toTo start the remotecontrol on page 73.2. Push the left side button (A) and the right side button(B) at the same time.Information centerA BCNote: The Information center display changemode if the buttons are pushed at the same time.3. Push the left side button (A) to go to selection "2" inthe information center display.4. Push the right side button (B) to select selection"2". The symbol (C) shows in the information centerdisplay.5. Push and hold the left and right side button at thesame time for 3 seconds.1401 - 005 - 11.01.2024 75