Husqvarna DXR 95 Operator's Manual

Also see for DXR 145: Operator's manual

Messages on the displayIn the bottom bar (A) of the display you can see activemessages or faults. To show the message push thebutton adjacent to the quick action with the trianglesymbol (B).12345 H XX BARA BThere are 4 different types of messages:• Information messages help and give hints on howto operate the product. An information message isshown as an information symbol in the bottom bar.• Caution messages show that something is notcorrect. A caution message is shown as a yellowtriangle in the bottom bar.• Warning messages show faults or safety defectsthat can cause mechanical damage. The product willstop in a short time. The warning is first shown in fullscreen with a red warning triangle and text. After youaccepted (C) the warning message, the warning isshown as a red triangle symbol in the bottom bar (A).REPLACE WITH CHARGED BATTERY SOONBATTERYLOWC DEF• Error messages show when the product is stoppedbecause of a fault or safety defect. The errormessage is shown in red with a white triangle andwhite text. When the fault is corrected you mustrestart the product, turn the OFF/ON/START switchto ON position. Then turn the OFF/ON/STARTswitch to START position.If there are more than 1 active message, the newestmessage is added from the right. Push the buttonsadjacent to the arrows (D and E) to move between themessages in the display.You can also find a fault list in the "Active faults"in "Machine status" in the menu button (F). Refer to"Machine status" menu on page 50.Fault codes and descriptionsThe fault code numbers for the product are shown onthe display. The fault code numbers for the remotecontrol (fault code numbers from 1001) are also shownon the information center display.Fault code number Message in the dis-play Cause Solution1 "Softstart error Startnot possible" General error in soft starter. Speak to Husqvarna service.2 "Softstart Fault indi-cation"Softstart is overload. The inputvoltage is out of range.Do a check of the input voltage.Let the product become cool.If the problem stays, speak toHusqvarna service.1401 - 005 - 11.01.2024 131