Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Also see for Tuxedo Touch Wi-Fi: User guide Quick installation guide

Honeywell Tuxedo Touch WIFI Installation And Setup Manual Manual pdf 13 page image

Initial Setup (cont’d)13Language Selection (if applicable)After initial ECP selection is set, the “Languages” menu is displayed. The Tuxedo Touch keypad allowsyou to select from four languages (English, French Canadian, Latin American Spanish, or LatinAmerican Portuguese) with the default being English.Time and Date SetupIf not already set from the control panel, set the current time and date. Refer to Time/Date Setup.Night SetupThe Keypad is defaulted to arm the system in the STAY INSTANT mode when arming the systemusing the NIGHT icon. Select the arming mode to be activated when the NIGHT icon is pressed on the“Arming” screen, refer to the “Night Setup” section.IP Setup and Network ConnectionsWeb Server/HostingThe Tuxedo Touch keypad offers built-in web hosting capability to access your Security and HomeAutomation System via any web enabled device. The Tuxedo Touch Keypads IP Address is used on astandard web browser to control user functions.Supported Browsers include:iPhoneTM Version iOS4, i-PadTM Version iOS4 and iOS5, Galaxy – Android 2.3, Internet Explorer 8 andSafari® 5.0.2. Webpage support iOS 6 and Google-TV.Supported Routers include:1. Netgear Model: WNR2000V3; Mode: None, WEP (64 bit & 128 bit), WPA personal, WPA2 personal,and Tx Key 1, 2, 3, 4.2. D-Link Model: DIR-632; Mode: None, WEP, WPA personal, and WPA2 personal.3. Linksys ® Model: WRT54GL; Mode: None, WEP, WPA personal, and WPA2 personal.IP Address SetupIn most cases, IP Addresses are assigned ‘automatically’ (Automatic IP Address). Or, you may require a“Static” (Fixed) IP Address that can be found by accessing your router. Refer to your router instructionsfor further information.To connect a mobile device to the Tuxedo Touch keypad, view the “Local System Control(Tablet/Smartphone)” training video, and then do the following:ACTION NOTES1. At your Smart Phone or Tablet:a) Navigate to the Settings feature.b) Turn ON the “Wi-Fi” setting and selectthe router to connect to. Enter a nameand password, if required.c) Open the browser and enter the IPAddress displayed on the keypad into yourbrowser.Or,After proper connection:• Access to basic arming commands is available if using aSmart Phone or Tablet browser.• Full access to keypad options is available if using a PCbrowser.• If left inactive, Web connections disconnect after 10minutes.UL • Web Server/Hosting is not Listed for use in UL installations.• Remote Arming/Disarming/Programming is not to be used in UL Listed Installations.