Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Also see for Tuxedo Touch Wi-Fi: User guide Quick installation guide

Honeywell Tuxedo Touch WIFI Installation And Setup Manual Manual pdf 17 page image

Setup (cont’d)17Adjust the Screen TimeoutsWhen the keypad is left idle, it automatically:• Turns the “Backlight Off After” the selected backlight off time has expired (unless “Never” option isselected).• returns to the “Home” screen after the selected “To Homepage After” time has expired (unless“Never” option is selected), and• if enabled, the “Auto Slideshow After” time begins the slide show.To select the desired screen timeouts, do the following:ICON ACTION NOTES1. From the "Home" screen, press the Setupicon.2. Press the Disp & Audio Setup icon.3. Enter your Authorized Code.4. Press the desired selection from the drop-down list displaying the time period for eachoption.5. Press the Save icon to save the settings.If changes are made, when you exit a pop-up windowdisplays: “Information Settings saved“Settings include:• Backlight Off After X time• Return To Homepage After X time• Auto Slideshow After X time.Notes• The “To Homepage After” Time option is onlyavailable if the Screen Blackout (EN50131Display) option is not enabled by the installer.• When in EN50131 mode, “Auto SlideshowAfter” is preset to “1” minute and can not bechanged.Clean ScreenWith the exception of normal cleaning, the keypad is maintenance free.Press the “Display and Audio” icon, and do the following:ICON ACTION NOTES1. Press the CLEAN SCREEN icon. A pop-upwindow displays "Touch Screen has beendisabled so that you may wipe the screen clean.Please use a damp, soft cloth. DO NOT use anyliquids, sprays, or ammonia-based cleansers.Press CONTINUE to disable touchscreen."*Panics cannot be initiated during this process*2. Press Continue or Cancel to exit.3. Press the Save icon.When the "Continue" icon is pressed themessage "Touch Screen Disabled for =30Seconds" is displayed. During these 30seconds the touch screen should be wipedclean of fingerprints using a mild soap solutionand a soft cloth. When the counter reacheszero, the window automatically closes and thetouch screen is active.IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the keypad ordamage to the touch screen may occur.The Emergency screen cannot be accessed while running in the clean screen mode.