Installing and removing driveswww.gateway.com396 Remove the diskette drive from the drive tray, then insert the new diskettedrive into the drive tray until it snaps into place.7 Push the drive tray with the new diskette drive into the opening in themedia cage until it clicks into place.8 Connect the USB cable to the back of the diskette drive.9 Follow the instructions in “Closing the server case” on page 32.10 Reinstall the bezel, if required, by snapping it into place on the front ofthe chassis.11 Reconnect all power cords and peripheral device cables, then turn on theserver.Filling empty drive baysEmpty drive bays in the server must be filled by empty drive trays. With the bezelremoved, install the appropriate carrier, then replace the bezel by snapping itinto place on the front of the server. Empty drive carriers for unused drive baysare included with your server.
