9 - AUX PAGES188 190-00357-00 Rev GDate / TimeTo display local time or UTC:1. Select “Date / Time” from the Setup Page.2. The flashing cursor highlights the “TimeFormat” field. Turn the small right knob todisplay a window of available time formats:Local 12hr, Local 24hr, or UTC.3. Continue turning the small right knob toselect the desired time format.4. Press ENT to accept the selection.To set the local time:1. Select “Date / Time” from the Setup Page.2. Turn the large right knob to highlight thetime offset field.3. Use the small and large right knobs to enter thedesired offset, beginning by entering a minus (-) orplus (+) sign to indicate whether the offset isbehind UTC or ahead of UTC. (In the UnitedStates, all local time offsets are minus, orbehind UTC.)4. Press ENT to accept the selected offset.NOTE: When a local time offset is entered, youmust also select “Local 12 hour” or “Local 24hour” time format. The “UTC” time format settingignores any time offset entry.Display Backlight.To change the backlighting intensity:1. Select “Display Backlight” from the SetupPage.2. The flashing cursor highlights the backlight“Mode” field. Turn the small right knob toselect the desired mode: Auto or Manual. PressENT to accept the selection.3. If “Manual” is selected, the flashing cursormoves to the backlight “Level” field. Turn thesmall right knob to select the desired level.Press ENT to accept the selection.Setup 1 Page