7 - NRST PAGES156 190-00357-00 Rev FPress ENT to place the frequency on standby.Press the COM flip-flop key to activate theselected frequency.6. Press the COM flip-flop key to activate theselected frequency.7. Press the small right knob to remove theflashing cursor.Nearest Flight Service Station (FSS) PageThe Nearest Flight Service Station Page displaysthe facility name, bearing to and distance to the fivenearest FSS points of communication (within 200NM of your present position). For each FSS listed,the Nearest Flight Service Station Page also indicatesthe frequency(s) and may be used to quickly tune theCOM transceiver to the FSS’s frequency. The selectedfrequency is placed in the standby field of the COMwindow and activated using the COM flip-flop key.For duplex operations, “RX” and “TX” indicationsappear beside the listed frequencies — indicating“receive only” or “transmit only” frequencies. The asso-ciated VOR is also provided for reference.FSS NameFrequency(s)Bearing To andDistance ToVOR Identifier(for duplex operation)Seventh Pagein NRST GroupTo quickly tune an FSS’s frequency from the Near-est Flight Service Station Page (GNS 530W only):1. Select the Nearest Flight Service StationPage.2. Press the small right knob to activate thecursor.3. Turn the small right knob to scroll throughthe list, selecting the desired FSS.Turn the small right knob to select thedesired FSS, then turn the large right knob tohighlight the desired frequency.4. Turn the large right knob to scroll downthe page, highlighting the desired frequency(COM frequency[s] or VOR frequency for duplexoperation.5. Press ENT to place the selected frequencyin the standby field of the COM or VLOCwindow.Nearest FSS
