Garmin GNS 530AW Pilot's Manual & Reference

Also see for 500W Series: Pilot's guide addendum Pilot's guide addendum Pilot's Guide & Reference Instructions Manual

Contents

Garmin GNS 530AW Pilot's Manual & Reference Manual pdf 149 page image

6 - WPT PAGES139190-00357-00 Rev GUser WaypointsTo select a VOR frequency from the VOR Page:1. Select the VOR Page from the WPT pagegroup.2. Press the small right knob momentarily toplace the cursor on the VOR identifier field. Ifyou wish to select another VOR, use the smalland large right knobs and press ENT whenfinished.3. Turn the large right knob to highlight thefrequency field and press ENT to place thefrequency in the standby field of the VLOCwindow.Using the large right knob, highlight theVOR’s frequency and press ENT to place thefrequency in the standby VLOC frequencyfield.4. To activate the standby VLOC frequency, pressthe VLOC flip-flop key.User Waypoint PageIn addition to the airport, VOR, NDB and intersec-tion information contained in your Jeppesen NavData®card, the 500W-series unit allows you to store up to1,000 user-defined waypoints. The User WaypointPage displays the waypoint name (up to five charac-ters long), identifier and radial from two referencewaypoints, distance from one reference waypoint,along with the user waypoint’s latitude/longitude posi-tion.User WaypointName Reference WaypointInformationTenth Page inWPT GroupCreate/ModifyAction FieldLatitude/LongitudePositionTo display information for a user waypoint,highlight the name field. Then use the smalland large right knobs to enter the waypointname.