Garmin 128 Owner's Manual

Also see for GPS 126: Specifications

Garmin 128 Owner's Manual Manual pdf 55 page image

51REFERENCENavigation SimulatorThe GPS 126/128’s simulator mode lets you prac-tice all aspects of its operation without active satelliteacquisition. You can plan and practice trips, enter newwaypoints and routes, and save them for use duringnormal operation.To activate the simulator:1. From the Menu Page, highlight ‘SYSTEM SETUP’, andpress F.2. Highlight the ‘mode’ field, and press F.3. Select ‘Simulator?’, and press F.Once the simulator mode has been activated, usethe Position, Compass, or Highway Page to set yourspeed and track by highlighting the appropriate field,entering the desired value, and pressing F. You mayalso enter a new position if you desire (from thePosition Page).The GPS 126/128 does not track satellites insimulator mode. Although you can create andsave waypoints and routes while using thesimulator mode, never attempt to use the simu-lator mode for actual navigation.Select the simulator modefrom the operation modechoices and press ENTER.You may return to normaloperation by changing theoperation mode or byturning the unit off.NavigationSimulator!#