Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer Support38Special features of your lower oven control.Tones at the End of a Timed CycleAt the end of a timed cycle, 3 short beeps willsound followed by one beep every 6 seconds untilthe Clear/Off pad is pressed. This continuous6-second beep may be canceled.To cancel the 6-second beep:Press the Bake and Broil Hi/Lo padsat the same time for 3 seconds untilthe display shows SF.Press the Kitchen Timer On/Offpad. The display shows CON BEEP(continuous beep). Press theKitchen Timer On/Off pad again.The display shows BEEP. (Thiscancels the one beep every6 seconds.)Press the Start pad.12-Hour, 24-Hour or Clock BlackoutYour control is set to use a 12-hour clock.If you would prefer to have a 24-hourmilitary time clock or black out the clockdisplay, follow the steps below.Press the Bake and Broil Hi/Lo padsat the same time for 3 seconds untilthe display shows SF.Press the Clock pad once. Thedisplay will show 12 hr. If this isthe choice you want, press theStart pad.Press the Clock pad again tochange to the 24-hour militarytime clock. The display will show24 hr. If this is the choice you want,press the Start pad.Press the Clock pad again to blackout the clock display. The displaywill show OFF. If this is the choiceyou want, press the Start pad.NOTE: If the clock is in the black-out mode, youwill not be able to use the Delay Start function.Auto Recipe ™ ConversionWhen using convection bake, the Auto Recipe™Conversion feature will automatically convertentered regular baking temperatures toconvection baking temperatures.Once the feature is activated, the displaywill show the actual converted (reduced)temperature. For example, if you enter a regularrecipe temperature of 350°F and press theStart pad, the display will show CON andthe converted temperature of 325°F.NOTE: This feature does not convert convectionbake cooking times, only regular bakingtemperatures.To activate the feature:Press the Bake and Broil Hi/Lo padsat the same time for 3 seconds, untilthe display shows SF.Press the Convection Bake pad. Thedisplay will show CON OFF. Press theConvection Bake pad again. Thedisplay will show CON ON.Press the Start pad.To deactivate the feature, repeat steps1–3 above but press the Start pad whenCON OFF is in the display.+++