GE Profile PT970SM Datasheet

Also see for Profile PT970SM: Brochure

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Listed byUnderwritersLaboratoriesSpecification Revised 9/07220145Sbto srCabinA –B –C –OvenD –E –E –*Dep26-9/20''28''21''AFABCCONDUIT(72'' LONG)CUTOUTHEIGHT42-3/16'' MIN.42-1/4'' MAX.CUTOUTWIDTH28-1/2'' MIN.28-5/8'' MAX.Minimumcutout location21-5/8''from the floor21" MinimumDoor AllowanceJUNCTION BOXLOCATIONCABINETWIDTH30''DOOR MUST BEREMOVED BEFOREINSTALLATIONMOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.DCUTOUT DEPTH23-1/2'' MIN.EKW Rating240V 6.4208V 5.6Breaker Size240V 30 Amps208V 30 AmpsNote: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating. Electric wall ovens arenot approved for installation with a plug andreceptacle. They must be hard wired in accordancewith installation instructions.Door handle protrudes 3" from door face. Cabinetsand drawers on adjacent 45° and 90° walls should beplaced to avoid interference with the handle.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.PT970SMGE Profile™ 30" Built-In Double Microwave/Convection OvenCL 2 x 4 orequivalentrunnersSuitablebracingto supportrunners21-5/8"over centerlineof cabinet(must support 275 lbs.)Cabinet 30"A – Overlap of oven over side of edges of cutout 11/16"B – Overlap of oven at top and bottom of cutout 1"C – Overall of oven at top of cutout 1/2"OvenD – Overall depth* 23-1/2"E – Overall height with trim 44"Overall height without trim 43-1/2"E – Overall width 29-3/4"*Depth including door handle is approximately 26-6/10" min. to26-9/10" max.20''28''21''AFABCCONDUIT(72'' LONG)CUTOUTHEIGHT42-3/16'' MIN.42-1/4'' MAX.CUTOUTWIDTH28-1/2'' MIN.28-5/8'' MAX.Minimumcutout location21-5/8''from the floorJUNCTION BOXLOCATIONCABINETWIDTH30''DOOR MUST BEEMOVED BEFOREINSTALLATIONALL CABINETS CAN BE USED WITH THIS UNIT.EN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.DCUTOUT DEPTH23-1/2'' MIN.EDimensions and Installation Information (in inches)

/ 2

Related manuals for GE Profile PT970SM