GE JT930 Owner's Manual

GE JT930 Owner's Manual Manual pdf 37 page image

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportCare and cleaning of the oven.Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.How to Remove Packaging TapeTo assure no damage is done to the finishof the product, the safest way to removethe adhesive left from packaging tapeon new appliances is an applicationof a household liquid dishwashingdetergent, mineral oil or cooking oil.Apply with a soft cloth and allow to soak.Wipe dry and then apply an appliancepolish to thoroughly clean and protectthe surface.NOTE: The plastic tape must be removed from allchrome trim. It cannot be removed if it is baked on.Oven Light BulbsNOTE: The glass cover should beremoved only when cold. Wearing latexgloves may offer a better grip.CAUTION: Before replacing youroven light bulb, disconnect the electricalpower to the oven at the main fuse orcircuit breaker panel.Be sure to let the light cover and bulbcool completely.For your safety, do not touch a bulb withbare hands or a damp cloth. It can alsoshorten the bulb life.To remove:Turn the glass covercounterclockwise 1/4 turn until thetabs of the glass cover clear thegrooves of the socket.Using gloves or a dry cloth, removethe bulb by pulling it straight out.To replace:Use a new 130-volt Halogen bulb,not to exceed 50 watts.Using gloves or a dry cloth, removethe bulb from its packaging. Do nottouch the bulb with bare fingers.Push the bulb straight into thereceptacle all the way. Then replacethe screen. NOTE: The screen mustbe replaced or the life of the bulbwill be reduced.Place the tabs of the glass cover intothe grooves of the socket. Turn theglass cover clockwise 1/4 turn.For improved lighting inside theoven, clean the glass coverfrequently using a wet cloth. Thisshould be done when the oven iscompletely cool.Reconnect electrical power tothe oven.BulbSocketTabGlass coverReceptacleUse glovesor clothReceptacleScreenHow to Exit the Sabbath FeatureTouch the CLEAR/OFF pad to makesure that the oven is turned OFF. Noaudible signal will be given.Hold the BACK key for 3 seconds. Noaudible signal will be given. This willtake the oven control out of theSabbath feature. The control willreturn to the Features menu whereSABBATH was originally selected.Select HOME to return to the mainmenu on the control display.www.GEAppliances.com37