Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision GArtisan 837/730/PX830FWD/PX730WD/TX730WD Disassembly/assembly 295Confidential3. Remove the screws (x9) that secure the Upper Housing.Figure 9-8. Removing the Upper Housing (2)4. Remove the screws (x2) that secure the Panel Unit.Figure 9-9. Removing the Upper Housing (3)5. Lift the Panel Unit until the screw (x1) under the Right Hinge can be seen, andremove the screw (x1).Figure 9-10. Removing the Upper Housing (4)6. Release the ribs (x3) and hook (x1) of the Upper Housing. (See Fig. 9-8.)7. Lift the Upper Housing slightly and disconnect the Panel FFC from the MainBoard, and remove the Upper Housing together with the Panel Unit.Figure 9-11. Removing the Upper Housing (5)8. Remove the Decoration Plate Left Upper from the Upper Housing.(See "9.4.2.3 Decoration Plate Left Upper" (p.296).)9. Remove the Panel Unit from the Upper Housing.(See "9.4.2.10 Panel Unit" (p.302).)12345869C.B.S. 3x6 (8±1Kgfcm)C.B.S. 3x8 (8±1Kgfcm)C.B.A. 3x8 (6±1Kgfcm)C.B.P. 3x10 (6±1Kgfcm)Upper HousingLeft HousingRight Housing7RibHookPanel Unit C.B.P. 3x10 (6±1Kgfcm)Right HingeC.B.P. 3x12 (8±1Kgfcm)Panel FFCMain BoardUpper Housing