Epson Artisan 810 Service Manual

Also see for Artisan 710 Series: Start here Network installation guide Specifications Quick guide Start here

Contents

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision GDISASSEMBLY/ASSEMBLY Disassembly Procedures 118Confidential3. Release the hooks (x3) on the bottom and dowel (x1) on the front side of theLeft Housing, and remove the Left Housing in the direction of the arrow.Figure 4-22. Removing the Left Housing / Decoration Belt L (2)4.2.3.8 Stacker Assy Parts/Components need to be removed in advance:ADF Unit (Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD only)/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing Removal procedure1. Pull the Stacker Assy.2. Bend the center of the Stacker Assy and release the dowels (x4) from thegrooves of the Base Frame, and remove the Stacker Assy.Figure 4-24. Removing the Stacker AssyCAUTIONSo as to make description easier, the printer in the photographs isplaced vertically in the following steps. Be careful about ink spillingif the printer is tilted in practical operation. Align and insert the rib in the front inside of the Left Housing tothe inside of the rib of the Base Frame.Figure 4-23. Installing the Left Housing Align the positioning hole of the Left Housing with the dowel ofthe Base Frame. (See Fig. 4-22.)Left HousingHookPositioninghole & dowelThe ribs of the LeftHousing and the BaseFrame are inside.Rib of the Base FrameRib of the Left HousingStacker Assy Dowel