Epson Artisan 810 Service Manual

Also see for Artisan 710 Series: Start here Network installation guide Specifications Quick guide Start here

Contents

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision GADJUSTMENT Adjustment Using Adjustment Program 216Confidential5.2.5 PF Adjustment PF-Standard AreaPatterns are printed as shown below.Figure 5-6. PF Adjustment (Standard Area) PatternHow to JudgeEnter the value for the group that has no gap or overlap between the upper and thelower patterns. PF-Bottom Edge AreaPatterns are printed as shown below.Figure 5-7. PF Adjustment (Bottom Edge Area) PatternHow to JudgeInput the value shown above the patterns which has no gap between the upper patternand the lower pattern, and also the both upper and lower patterns do not overlap eachother.Example: In the above figure, patterns below “4” has no gap and overlap, so input “4”.Additional informationIn case that all patterns have gap or overlap, select the value for the pattern which hasthe least gap or overlap, and print the pattern again.CHECKPOINTExample for judgement-132-2014OK NGNGCHECKPOINTExample for judgement2 3 4 5 6 7 81Upper blockLower blockOK NGNGGapOverlap