Setting Item Description, InstructionsTestPrint Paper Details Print the paper settings as specified in Paper Details.Print Job Log Print a record of print jobs, including the paper typeand size, amount of ink consumed, and so on. Ink con-sumption indicates a rough estimate of how much inkwas consumed per page.(*1 →P.684 )Menu Map Print the menu structure.Color Palette Print the GL2 color palette.AdjustPrinterHeadPosi.Adj.Auto(Standard) The printer prints and reads a test pattern for the auto-matic adjustment of Printhead alignment relative tothe printing direction. (See "Automatic Adjustmentto Straighten Lines and Colors (Head Posi. Adj.).")→P.619Auto(Advanced) The printer prints and reads a test pattern for the auto-matic adjustment of Printhead alignment relative tothe printing direction and spacing between nozzles andcolors. (See "Automatic Adjustment to StraightenLines and Colors (Head Posi. Adj.).") →P.619Manual Print a test pattern for adjustment of Printhead align-ment relative to the printing direction. Enter the ad-justment value manually based on the resulting pat-tern. (See "Manual Adjustment to Straighten Linesand Colors (Head Posi. Adj.).") →P.621Head Inc. Adj. Print a test pattern for adjustment of the Printhead ori-entation. (See "Adjusting Line Misalignment (HeadInc. Adj.).") →P.623FeedPriori-tyAdj.Priori-tyAutomatic Specify exact paper feeding, if desired. Normally, se-lect Automatic. Choose Print Quality for attractiveprinting. Choosing Print Quality also makes bandingless noticeable. Choose Print Length if you prefer tofeed the paper an exact amount. However, note thatslight banding may occur in the direction of carriagescanning when Print Length is selected.Print QualityPrint LengthAdj.QualityAuto(GenuinePpr) Specify this mode with paper identified in the PaperReference Guide.The printer prints and reads a test pattern for automat-ic adjustment of the feed amount. (See "AutomaticBanding Adjustment (Adj. Quality).") →P.630Auto(OtherPaper) Specify this mode with paper not in the Paper Refer-ence Guide.The printer prints and reads a test pattern for automat-ic adjustment of the feed amount. Note that this func-tion takes more time and consumes more ink than Au-to(GenuinePpr). (See "Automatic Banding Adjust-ment (Adj. Quality).") →P.630Manual Use this mode with highly transparent media or otherpaper for which Auto(GenuinePpr) or Auto(Other-Paper) cannot be used.Print a test pattern for adjustment of the feed amountbased on the type of paper. (See "Manual BandingAdjustment (Adj. Quality).") →P.631Control Panel > Printer Menu >iPF750 Menu Settings8677
