a. Accessory PocketStores printer accessories.b. Output StackerPrinted documents are ejected into the output tray.c. Locking CasterLock to immobilize the caster.Before moving the printer, always unlock all four casters. Moving the printer while casters are locked may scratchthe casters or the floor.d. Adjustable StopperPull out depending on the paper size when using the output stacker in the Extended position A.For details on the extended position, see "Using the Output Stacker." →P.611e. Paper GuideGuides printed documents into the output stacker.f. Output stacker handleThis handle is grasped and supports the sliding output stacker when putting the output stacker into Extended posi-tion B and returning it to the regular position.For details on the extended position, see "Using the Output Stacker." →P.611g. Output stacker release leverPull this lever towards you to release Extended position B.For details on the extended position, see "Using the Output Stacker." →P.611h. Output Stacker Ejection GuidesThis guide supports the paper that is output when using the output stacker in Extended position B.Note• The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33. Either one or theother of these Stand is included with the printer depending on the region and time when you purchased theprinter.• The output stacker of the Printer Stand ST-33 has a regular position and an Extended position A.For details on the extended position, see "Using the Output Stacker." →P.611• The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look differentfrom the appearance of your printer in some cases.Printer Parts > Printer parts >Stand iPF7507646
