Canon imagePROGRAF iPF750 MFP M40 User Manual

Also see for imagePROGRAF iPF750 MFP M40: Install guide Basic guide Basic guide Brochure Basic guide

Contents

Canon imagePROGRAF iPF750 MFP M40 User Manual Manual pdf 611 page image

Cutting Method Printer Setting Driver SettingPaperCut-ting→P.598Otherwise choose this option if you want to cutthe roll edge after loading a roll.Auto CutCut but-ton press-edYes No Print CutGuidelineNote• Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keep-ing the preset cutting mode.Cut rolls manually in the following cases:Eject (waiting for ink to dry after printing)Important• When cutting wide printed documents after ejection, have two people support the documents. If the paperdrops, printed documents may be damaged.• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect theprinting quality or cause rough cut edges.1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2. Press the OK button. The Paper Menu is displayed.Handling Paper > Handling rolls >iPF750 Specifying the Cutting Method for Rolls5595