3-8CopyingYou can make a copy of a 2-sided card onto one side of apaper.Keys to be used for this operationStartCOPYOK1 Place a card on the platen glass, and then closethe feeder.Place the card with a 1/4” (5 mm) space created from the left edgeof the platen glass.Additionally, align the center of the card with the arrow mark.If you want to arrange the cards horizontallyA4B4A5A5B4A4If you want to arrange the cards verticallyA4B4A5A5B4A42 Press [ ].3 Press [ ] or [ ] to select , and thenpress [OK].Copy: Press Start100% LTR2-Sided: OffCopy Ratio: 100% Di...N on 1: Off1 014 Press [ ] or [ ] to select , andthen press [OK].N on 1Off2 on 14 on 1ID Card Copy5 Press [ ] (Start).After scanning the document completely, proceed to the next step.6 Turn and place the card.Place the card with a 1/4” (5 mm) space created from the left edgeof the platen glass.Additionally, align the center of the card with the arrow mark.If you want to arrange the cards horizontallyA4B4A5A5B4A4If you want to arrange the cards verticallyA4B4A5A5B4A47 Press [ ] (Start).NOTEPlacing a document (card)Place a card on the left half of the platen glass.Copy ratioThe copy ratio will automatically be set to <100%>.Usable paper sizeA size larger than A4 or LetterUnavailable functions in combinationYou cannot use an ID card copy together with the followingfunctions.• 2 on 1/4 on 1• Collating• 2-Sided• Copy ratioCopying an ID Card
