|
6-21Using the Fax FunctionsHow to display the settings[ ] (Menu) Settings> Settings(Bold: Default settings)Off Does not use the ECM function.On Uses the ECM function.Pause TimeSpecify the length of a pause when [ ] (Pause) ispressed.For details on adding pauses, see “Sending a Fax Abroad(Adding Pauses)” (P.6-8)How to display the settings[ ] (Menu) Settings> Settings(Bold: Default settings)1 to 2 to 15 (seconds)Auto RedialSet auto redialing to automatically reattempt to connect toa destination if the line is busy or a send error occurs. Youcan also specify the how many time to redial a number andan interval between attempts.How to display the settings[ ] (Menu) Settings> Settings(Bold: Default settings)OffDoes not redial automatically.When redialing manually, see“Redialing (Manual Redialing)”(P.6-6).OnRedial Times:1 to 2 to 10 (times)Set the number of redialattempts.Redial Interval:2 to 99 (minutes)Set an interval (in minutes)between redial attempts.Redial When ErrOccurs: Off, OnSpecifies whether or not to redialwhen a send error occurs.Check Dial Tone Before SendingWhen sending a fax, you can specify whether or not toverify the dial tone before dialing.How to display the settings[ ] (Menu) Settings> Settings(Bold: Default settings)Off Does not check the dial tone.On Checks the dial tone before dialing.Setting Procedure for Receiving FaxesSpecify the settings for receiving faxes using the followingprocedure.This section describes the procedure for changing the settingfor “ECM RX” as an example.Keys to be used for this operationMenuOK1 Press [ ] (Menu).2 Press [ ] or [ ] to select , andthen press [OK].MenuTimer SettingsCopy SettingsFax TX SettingsFax RX Settings3 Press [ ] or [ ] to select , andthen press [OK].Fax RX SettingsRX Function SettingsFax Settings4 Press [ ] or [ ] to select , and thenpress [OK].Fax SettingsECM RXIncoming RingRemote RXAuto RX Switch
|
