8-4MaintenanceCleaning the Platen GlassFollow this procedure to clean the platen glass and undersurface of the feeder.1 Turn OFF the power switch and disconnect thepower cord.2 Open the feeder.3 Clean the platen glass and the under surface ofthe feeder.(1) Clean the areas with a cloth dampened with water.(2) Wipe the areas with a soft, dry cloth.IMPORTANTPrecautions when cleaning the platen glassBe careful not to fold the transparent sheet (A) at the left side of theplaten glass.(A)4 Close the feeder.5 Connect the power cord and turn ON the powerswitch.Cleaning the FeederIf your documents have black streaks or appear dirty afterscanning using the feeder, the roller inside the feeder may bedirty. Clean the feeder scanning area and roller.1 Turn OFF the power switch and disconnect thepower cord.2 Open the feeder cover.3 Clean the rollers (A) inside the feeder with a wellwrung out cloth dampened with water, and thenwipe the area with a soft, dry cloth.(A)4 Close the feeder cover.5 Connect the power cord and turn ON the powerswitch.Precautions When Cleaning the MachineBefore cleaning the machine, check the following.• Ensure no jobs are stored in memory, then turn OFF thepower switch and disconnect the power cord.• Use a soft cloth to avoid scratching the components.• Do not use tissue paper, paper towels, or similar materialsfor cleaning. They can stick to the components orgenerate static charges.
