Chapter 11-541.2.3.13 Transmission/Reception Settings 0009-2501/ iR3530*Factory default.***Indicated when appropriate accessories are installed.set faxtransmissionfunctionECM transmission (*ON/OFF)set pause length: (*1 to 15 sec/4 to 11 sec/3 to 6 sec)auto re-dial: (*ON/OFF)number of redials: 100V: 1-15 (*2), 120V: 1-10 (*2), 230V: 1-10 (*2)intervals for redials (min): 2-99 (*2)redial at communication error: 1st page and error page/all pages/offcommunication mode: *G4-G3/G3 onlycheck dial tone before transmission: (*ON/OFF)set faxreceptionsettings***ECM reception: (*ON/OFF)select reception modefax/tel switchover: call start time: 0 to 30 sec (*8)call length: 15 to 300 sec (*17)operation after call: end/*receiveaudio response: ON/*OFFauto receptionmodem dial-in fax/tel switchoverincoming ring: on (number of rings: 0 to N times)/*OFFremote reception: on (remote reception ID: 00 to 99, 25)/*OFFauto reception switch-over: on (length of ring: 1 to n sec)/*OFFsource record (G4): *add/do not addsource record position: inside image/*outside imageset faxexpansion lineregister user telephone No.: 20 characters max.register user abbreviation: 24 characters max.select line type: *20 pps/10pps push toneselect transmission line:line 1: *priority on transmission/prohibit transmissionline 2: priority on transmission/prohibit transmissionMode Description
