Chapter 1414-114.1 Making lnitial Checks14.1.1 Site Environment 0007-9383iR2270 / iR2870 / iR3570 / iR4570 / iR3530a. There must be a source of power whose voltage is as specified (+/-10%). The power plug must never bedisconnected day and night.b. The machine must not be in an area subject to high humidity (near a water faucet, water boiler, humidifier). Thesite must not be too cold or subject to dust. The machine must not be near a source of fire.c. The site must not be subject to ammonium gas.d. The machine must not be exposed to the rays of the sun. As necessary, curtains must be provided.e. The area must be well ventilated. The machine must be on a level floor.In addition, be sure that there is a source of power that can be used by the machine at all times.14.1.2 Checking the Paper 0007-9384iR2270 / iR2870 / iR3570 / iR4570 / iR3530a. Be sure the paper being used is of a type recommended by Canon.b. Be sure that the paper is not moist. Try using paper fresh out of package.14.1.3 Checking the Placement of Paper 0007-9385iR2270 / iR2870 / iR3570 / iR4570 / iR3530a. There must be paper in the cassette or the tray deposited within a specific limit.b. If transparencies are used, be sure that they are placed in the manual feed tray in the correct orientation.14.1.4 Checking the Durables 0007-9386iR2270 / iR2870 / iR3570 / iR4570 / iR3530Refer to the table of durables, and replace those that have reached the end of their lives.14.1.5 Checking the Periodically Serviced Items 0007-9387iR2270 / iR2870 / iR3570 / iR4570 / iR3530Refer to the periodical servicing chart and the table of periodically replaced parts. As necessary, clean or replaceparts.
