Chapter 1515-1515.2.2 E602 in Detaill 0008-1182iR2270 / iR2870 / iR3570 / iR45700004 An attempt to switchover to a languageon the HDD fails.Download a language file of the correctversion.1000 The boot ROM that is mounted is of thewrong type.Replace the boot ROM with one of themodel in question.2000 The engine ID indicated by the softwareID is illegal.Replace it with a software ID of the correctmodel.E745 There is a fault on the TokeRing board.0001 An attempt at PCI initialization hasfailed.1. Disconnect and then connect theTokeRing board.2. Replace the TokeRing board.0002 The MAC address is faulty. 1. Replace the TokenRing board.0003 There is an error in the acquisition/settingof board information.1. Replace the TokenRing board.0004 There is a connection error. 1. Check the connection of the cable.2. Replace the cable.3. Check the power source of the MAU.4. Replace the MAU.5. Replace the TokenRing board.0005 Other ErrorsE746 The accessories board is of the wrong type.0003 At startup, a board for a different modelhas been detected.Replace the UFR board of the correct type(model).E748 There is a mismatch between controller board and SDRAM size.1001 There is a mismatch between the controlboard and the SDRAM.Check the correct combination betweenboard and SDRAM.E805 There is a fan error.0000 While the fan is at rest, the lock signal hasbeen detected for 5 sec.While the fan is in operation, the locksignal is not detected for 5 sec.Replace the fan. Replace the DC controllerPCB.Code Cause Remedy
