Chapter 22-12.1 Making Pre-Checks2.1.1 Selecting the Site of Installation 0007-4754iR2270 / iR2870 / iR3570 / iR4570Select the site of installation against the following requirements; if possible, visit the user's before delivery of themachine:1) There must be a power outlet properly grounded and rated as indicated (+, -10%) for exclusive use by the machine.2) The environment of the room must be as indicated in the following diagram, and the machine must not be installednear a water faucet, water boiler, humidifier, or refrigerator:F-2-13) The machine must not be installed near a source of fire or in an area subject to dust or ammonium gas.If the area is exposed to direct rays of the sun, provide curtains to the window.4) The room must be well ventilated. (The level of ozone generated by the machine in use will not affect theindividuals around it. However, some may find its odor to be unpleasant, as when working in a poorly ventilatedroom.)5) The floor of the machine must be level so that the feet of the machine will remain in contact and the machine willremain level.6) The machine must be at least 10 cm away from any wall, permitting unobstructed use.- Without a Finisher or Side Paper Deck-P1 InstalledHumidity (%RH)80604020100 10 15 20 27.5 30(32) (50) (59) (68) (81.5)(86)Temperature7525
