Chapter 1010-5large: large-sized paper (in feed direction, 364 mm or longer; count x 1)small: small-sized paper (in feed direction, 364 mm or less).total: all (C + P); count x 1.double-sided: in auto double-side copying count x 1; feed.- The 3-digit symbol in the Counter column indicates the setting in the following service does item:1 through 6 under COUNTER>OPTION>USER>COUNTER.- Counters 2 through 6 may be changed in the following service mode mode item:COPIER>OPTION>USER.*1 :F14-3213/ 3223/ 3218/ 3211/ 3228/ 3221/ 3318/ 3311/ 3328/ 3321/ 3319/ 3312/ 6718/ 6711/ 6728/ 6721/ 6719/6712*2 :None in particular*3 :F14-3338/ 3331/ 6738/ 6731/ 5438/ 5431*4 :F14-3248/ 3241/ 3348/ 3341/ 6748/ 6741/ 5448/ 5441*5 :F14-3298/ 3291/ 3398/ 3391/ 6798/ 6791/ 5498/ 5491*6 :F14-3268/ 3261/ 3368/ 3361/ 6768/ 6761/ 5468/ 5461** by default, not indicated; may be changed in service mode.*** '1' is set for the following service mode item: COPIER>OPTION>USE>CNT-SW.**** '1' is set for the following service mode item: COPIER>OPTION>USER>CNT-SW.10.2.2 Timing of Increasing the Count 0006-5385iR2270 / iR2870 / iR3570 / iR4570 / iR3530The timing at which the count is increased differs depending on the printing mode (single-sided or double-sided),target of delivery, and type of accessory:1. Singe-Sided Printing, 2nd Side of a Double-Sided PrintIn single-side printing or for the 2nd side of a double-sided print, the count is increased when the trailing edge ofthe sheet is discharged outside the machine in relation to the output of the following sensors:T-10-2240V CA*6total 1 total(large)copy(total 1)copy(large)notindicated**notindicated**101 103 201 203 000 000Condition Target ofdelivery SensorFinisher absent Tray 1 Delivery sensor (PS14)Counter1Counter2Counter3Counter4Counter5Counter6
