Canon iR4570 Series Service Manual

Also see for iR2270 Series: Product description Printer guide User guide Service manual Service manual

Contents

Canon iR4570 Series Service Manual Manual pdf 142 page image

Chapter 22-32enter the appropriate card number (1 to 2001).-Use the number that is the lowest of all the numbers that the user will be using.-As many as 1000 cards may be used starting with the number entered.13) Turn off the control panel power switch.14) Turn off and then on the main power switch.2.6.4 Installation in a NetSpot Accountant (NSA) Environment 0007-2764iR2270 / iR28701) Make the following selections in user mode: system control setup>group ID control>count control; then, see thatthe following numbers are available: ID00000001 to ID00001000. (If you entered '1' in service mode:COPIER>FUNCTION>INSTALL>CARD.)2) Make the following selections in user mode: system setup>network setup>TCP/IP setup>IP address. Set thefollowing: 'IP address', 'gateway address', 'subnet mask'.Unless you have set 'system control group ID' and 'system control ID No.', you will not be able to execute 'registercard to device' as part of NSA setup work.3) In user mode, enter numbers of your choice for 'system control ID' and 'system control ID No.' as part of systemadministrator information.4) Turn off the control panel power switch.5) Turn off and then on the main power switch.