Chapter 11-451.2.3.6 Adjustment and Cleaning 0009-2479/ iR3530*Factory default.***Indicated when appropriate accessories are installed.T-1-321.2.3.7 Report Output 0007-3167iR2270 / iR2870 / iR3570 / iR4570*Factory settings.***If iR4570, iR3570, iR2870, or iR2270, indicated in the presence of a specific accessory (if model F, standard).T-1-33center bind positionchange** (w/ saddle finisher)size: A3,11x17/B4/LGL/A4R,LTRRposition: -2.0 mm to +2.0 mm (in 0.35-mm increments)/*0 mmdensity correction copy/Box, transmit; 9 sets each (at time of shipment, set to '5')page print/number of setprints adjust stamp positionX: -8 mm to +8 mm (in 1-mm increments)/*0 mmY: -8 mm to +8 mm (in 1-mm increment)/*0 mmclean feeder*** Start keyMode Descriptionzoom fine-adjust XY independent: -1.0% to +1.0% (in 0.1% increments), *0%density correction copier/box, transmit (each in 9 steps; at time of shipment, set to '5')feeder cleaning*** Start keyMode Descriptiontransmit (setup)*** transmission results report: *only if error/ON/OFFshow transmission original: *ON/OFFshow transmission original for coded PDF: ON/*OFFcommunication control reportprint automatically at 100 communications:print at specified time: ON/*OFFset time: *00:00 to 23:59separate transmission and reception: ON/*OFF (toggle)Mode Description
