T-16-2COPIER > DISPLAY > ACC-STSSub-item Description LevelFEEDER DADF connection status0: Not connected 1: Connected 1SORTER Finisher and punch unit connection statusSorter type 0: None 1: Finisher 2: Saddle finisherPunch type 0: None 1: 2 holes 2: 2/3 holes 3: 4 holes (fr) 4: 4 holes(sw)1DECK Paper deck connection status0: Not connected 1: Connected 1CARD Card reader connection status0: Card reader connected with no card inserted1: Card reader not connected or connected with card inserted(1: Ready to copy, 0: Not ready to copy)1DATA-CON Copy data controller connection status0: Not connected 1: Connected 1RAM Capacity of the memory on the main controller circuit board 256 MB,512 MB 1COINROBO Coin vendor connection status0: Not connected 1: Connected 1NIB Network board connection status0: No board connected1: Ethernet board connected2: Token ring board connected3: Ethernet board and token ring board connected1PS/PCL Not used 1NETWARE Netware firmware installation status0: Not installed 1: Installed 1SEND Send function addition status0: Send function not added 1: Send function added 1PDL-FNC1/2 Valid PDL0000 0000 0000 0000 to 1111 1111 1111 1111 (0:OFF,1:ON)b31 to b16 for PDL-FNC1b15 to b0 for PDL-FNC2b31: BDL, b30: PS, b29: PCL, b28: PDF, b27: LIPS, b26: N201, b25:I5577, b24: ESC/P, b23: HPGL, b22: HPGL2, b21: IMAGING, b20:KS, b19 to b0: Reserved1HDD Model name of the hard disk drive 1
