Canon PIXMA MP830 User Manual

Also see for 0583B002 - Pixma MP830 Office All-In-One Inkjet Printer: Start here

Contents

Canon PIXMA MP830 User Manual Manual pdf 8 page image

6Handling Do not attempt to disassemble or modify the machine. There are no user serviceable parts insidethe machine.The machine contains high-voltage components. Never attempt any maintenance procedure notdescribed in this guide. Incorrect maintenance procedures may damage the machine, or cause afire or electrical shock.Do not drop paper clips, staples, or other metal objects inside the machine. Also do not spill water,liquid, or flammable substances inside the machine. If these items come into contact with high-voltage parts inside the machine, it may result in fire or electrical shock. If these items are droppedor spilled in the machine, turn OFF the power and unplug the power cord immediately with dryhands. Then contact the Canon Customer Care Center.Do not use flammable sprays near the machine.This could cause a fire or electrical shock if the spray comes into contact with electricalcomponents inside the machine.There are high-voltage components inside the machine. If you are looking inside the machine toclear paper jams etc., do not allow metal objects such as jewelry to come into contact with theinside of the machine. Contact may result in burns or electrical shock.Others This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,please move away from this product and consult your doctor.When setting the machine near electric products with fluorescent lighting, separate the machine atleast 5.9 inches (15 cm) from electric products equipped with fluorescent lighting. If you place itnear to them, the machine may malfunction as a result of the noise emitted by the fluorescentlighting.When turning OFF the power, be sure to press [ON/OFF] and confirm that the Alarm Lamp hasshut off. If you pull the power plug out of the wall outlet while the Alarm Lamp is lit or flashing, thePrint Head is not protected, and you may not be able to print later.CautionYou may cause injury or damage the machine if you ignore any of these safety precautions.Location Do not block or cover the ventilation port or any openings on the machine with objects, as it maycause the inside of machine to overheat and cause a fire.Place the machine on a flat, stable, vibration-free surface that is strong enough to support itsweight. If the machine topples over, it may result in injury. (For the weight of the machine, see“Appendix” on page 197.)Do not use or store the machine outdoors.Do not install the machine near devices that contain magnets or generate magnetic fields, such asspeakers.To ensure proper ventilation, make sure the machine is approximately 4 inches (10 cm) away fromwalls and other equipment.Do not install the machine in a location that is very humid or dusty, in direct sunlight, outdoors, orclose to a heating source.Installing in such a location may result in fire or electrical shock.To avoid the risk of fire or electrical shocks, install the machine in a location with an ambienttemperature range of 41°F to 95°F (5°C to 35°C) and humidity of 10% to 90% (condensation free).Do not place the machine on a thick rug or carpet.If fibers or dust come inside the machine, it could cause a fire.