|
136 Chapter 9Changing the Machine Settings Two-sided output settingSets the paper output setting for double-sided documents.Fax SettingsBefore changing any settings, you can print the User's data list to check the current settingsof your machine. For details, see “Printing the User’s Data List” on page 105. Receive mode settingsz FAX/TEL auto switchSets the receive mode to .z FAX onlySets the receive mode to .z Manual RXSets the receive mode to .z Ans. machine connect.Sets the receive mode to .z DRPDSets the receive mode to . This setting is only available in US and Canada.z Network switchSets the receive mode to . Memory referencez Print memory listLists the documents currently stored in the machine’s memory.z Print specified documentPrints the specified document stored in the machine’s memory.Importantz This function only works when both paper sources are loaded with paper of the same sizeand type.z When printing from a computer, you need to set this feature with the printer driver. Fordetails, refer to the Printer Driver Guide.z When printing from a computer, this feature can be used only when both paper sources areloaded with paper other than Credit Card- or Legal-sized paper.z In Copy mode or Memory card mode, this feature can be used only when both papersources are loaded with paper other than Credit Card- or Legal-sized paper.z In Fax mode, this feature can be used only when both paper sources are loaded with A4-or Letter-sized plain paper.
|
