|
140 Chapter 9Changing the Machine Settingsz Incoming ringSets whether to ring with an incoming call when the receive mode is set to or TEL auto switch>. A telephone needs to be connected for the machine to ring.z Manual/auto switchSets, when the receive mode is set to or , whether toautomatically receive faxes after the machine rang a specified length of time.z Remote RXEnables/disables remote reception.z RX image reductionEnables/disables automatic reduction of incoming faxes so that they fit in the selected paper.z RX start speedSelects the fax reception speed.z RX reportSets whether to print a reception report after each reception.Other Settings Read/write attributeSelects whether to allow data to be written onto memory cards from a computer. Volume controlSelects the volume.z Keypad volumeSelects the beep volume when pressing the buttons on the Operation Panel.z Alarm volumeSelects the alarm volume.Ring count Specifies the number of times the machine rings when is selected.RX start time Specifies the length of time until automatic reception is startedwhen is selected.Remote RX ID Specifies the remote reception ID when is selected.Image reduction direction Selects the image reduction direction when is selected.ImportantIf you set this setting to , card direct printing cannot be done. After youfinish operation of the memory card dedicated drive, be sure to revert this setting to only mode>.
|
