Chapter 1 21Before Printing3 Gently close the Document Cover.z Using The ADF1 Remove any documents from the Platen Glass.2 Open the Document Tray.3 Load the document in the ADF (1).Load the document with the side you want to copy, fax, or scan face side up in the ADF.Notez The machine cannot scan the area within about 0.08" / 2 mm from the rear edge, andwithin about 0.08" / 2 mm from the left edge of the Platen Glass.z You can also scan in originals that are up to 0.8" / 20 mm thick, such as books. Set themon the Platen Glass in the same way as documents.Notez Set a document on the Platen Glass if you want to scan it at optimum quality.z When the document is set to the ADF, the first 0.08"/2mm of the leading edge of thedocument (the part that is first scanned) will not be read.(1)
