108 Chapter 5Faxing Sending MethodsThere are four methods of sending faxes:z Sending from your machine (Memory sending)z Sending manually from your machinez Sending to multiple recipients from your machine in one operation (Sequential broadcasting)z Sending from your computerThis section describes how to use these methods.z Sending From Your Machine (Memory Sending)1 Prepare for faxing.(1) Press [ON/OFF] to turn on the machine.See “Turning on the Machine” on page 18.(2) Load the document on the Platen Glass or the ADF.(3) Press [FAX].(4) Adjust fax settings as necessary.See “Before Sending Faxes” on page 106.2 Start faxing.(1) Dial the recipient’s number using the Numeric buttons or speed dialing.(2) Press [Color] for color sending, or [Black] for black & white sending.z When the document was loaded on the Platen Glass:(3) When the following message is displayed, load the next page on the Platen Glass.If you have only one page of document to scan, go to step (6).(4) Press [Color] or [Black].(5) Repeat steps (3) and (4) to scan in all pages of the document.(6) Press [OK].ImportantWhen sending a double-sided document, set the document on the Platen Glass. Youcannot scan double-sided documents from the ADF.NoteFor details on document requirements and how to load documents, see “LoadingDocuments to Copy, Fax, or Scan” on page 19.NoteFor details on how to use speed dialog, see “How to Use Speed Dialing” on page 111.
